Dynon Avionics SV-INTERCOM-2S Guia do Utilizador descarregar pdf (Página 13)

Installation

SV-INTERCOM-2S Installation and User Guide - Revision A 2-5

shield (which is also grounded at pin 1) at the intercom end of the harness is a suitable way to

accomplish this goal.

SV-INTERCOM-

SkyView Unit

SV-INTERCOM-2S

Function

Notes

N/A

Master Ground In /

Master Shield Ground.

The shields of all shielded audio

cables should be connected to

this pin.

N/A

Microphone / PTT Ground

Pilot and Copilot

N/A

Copilot Microphone

N/A

Auxiliary Mono Muting

Input

This audio signal mutes when

audio signals are received on

other non-muting inputs and

radio inputs. Use this input for

NON critical audio signals.

SV-D700 / SV-

D1000(s)

D37 Pin 26

LED Dimmer Input

Used for SkyView Dimming

Output

If more than one SkyView display,

connect this to only ONE of the

SkyView displays. See note below.

SV-D700 / SV-

D1000(s)

D37 Pin 31

Stereo Non-Muting

(SkyView/EFIS) Audio

Input Right

This audio signal does not mute,

and is typically used to receive

audio from SkyView or other EFIS

system with stereo output.

SV-COM 425 #2

Pin 10

Radio 2 or Other Aux

Non-Muting Audio Input

This audio signal does not mute.

Typically used for a second COM,

a NAV radio, or other mono

avionics alerts.

N/A

Copilot Headphones Left

N/A

Pilot Headphones Left

N/A

Pilot Push-To-Talk Switch

Input

N/A

Stereo Music In Right

This input is over-ridden by the

Music In jack on the SV-

INTERCOM-2S

SV-COM-425 #1

Pin 5

SV-COM-425#2

Pin 5

Push-To-Talk Output

If two radios are used, this signal

must be switched between the

two radios so that only ONE radio

transmits at a time.

N/A

Power In

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 22 23

Comentários a estes Manuais

Sem comentários

Dynon Avionics SV-INTERCOM-2S Guia do Utilizador Página 13

Comentários a estes Manuais